BDSTP - F-117B RESIN COMP, 1P2
- MSDS: BDSTP
- Manufacturer: SEAGRAVE COATING CORP CHEMRAY DIV
- Product Name: F-117B RESIN COMP, 1P2
- National Stock Number: 8030-00-281-2726
Product Identification
Product ID:F-117B RESIN COMP, 1P2
MSDS Date:11/01/1985
FSC:8030
NIIN:00-281-2726
MSDS Number: BDSTP
Responsible Party
KENILWORTH, NJ 07033
US
Emergency Phone: 201-245-1111
Info Phone: 201-245-1111
Cage: 8D124
Contractor
Telephone: 201-245-1111
Cage: 8D124
Ingredients
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 53.0%
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
N-BUTYL ALCOHOL (SARA III)
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 19.0%
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ZINC CHROMATE
CAS: 13530-65-9
RTECS: GB3290000
Fraction By Weight: 8.3%
OSHA PEL 0.1 MG/M3 (CRO3)
ACGIH TLV: 0.01MG/M3(CR)A1;9192
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 6.0%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
COPPER PHTHALOCYANINE BLUE -PIGMENT
Hazards
Effects of Overexposure:MAY BE IRRITATING TO SKIN, EYES, AND
RESPIRATORY SYSTEM
First Aid
First Aid:WASH EXPOSED AREA FREELY W/WATER. IF OVEREXPOSURE, REMOVE
SUBJECT TO WELL-VENTILATED AREA. CALL PHYSICIAN IF NECESSARY. IN
CASE OF CONTACT W/EYES, FLUSH W/WATER AND CONTACT PHYSICIAN.
Fire Fighting
Flash Point Method:SCC
Flash Point:53.0F,11.7C
Lower Limits:1.2%
Extinguishing Media:USE FOAM, DRY CHEMICAL OR CO*2 TO EXTINGUISH LIQUID
FIRES (NFPA CLASS B). USE WATER FOG TO PROTECT EXPOSED MATERIAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . WATER MAY BE INEFFECTIVE.
Unusual Fire/Explosion Hazard:KEEP CONTAINER TIGHTLY CLOSED. ISOLATE
FROM HEAT, ELECTRICAL EQUIPMENT, SPARKS & OPEN FLAME. CLOSED
CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:FOLLOW GENERAL CLEANING PROCEDURES. SMALL
SPILLS MAY BE WASHED AWAY W/WATER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY PLACE AWAY FROM
OPEN FLAMES AND PHYSICAL ABUSE.
Other Precautions:THE MATERIAL IS SHIPPED AS 4 GAL OF RESIN COMPONENT &
1 GAL OF ACID CATALYST IN A 5 GAL PAIL. THE 2 COMPONENTS SHOULD BE
MIXED AND ALLOWED 30 MIN. INDUCTION. SECURE ALL SOURCES OF
IGNITION.
Exposure Controls
Respiratory Protection:SELF-CONTAINED BREATHING APPARATUS AND EYE
PROTECTION
Ventilation:LOCAL EXHAUST OR MECHANICAL(GENERAL)
Protective Gloves:YES
Eye Protection:YES
Supplemental Safety and Health
A POLYVINYL-BUTYRAL RESIN IS THE VEHICLE. (8.7 AN ADDITIONAL SOLVENT IS
WATER (5%)
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:>175F,>79C
Vapor Pres:31
Vapor Density:>1
Evaporation Rate & Reference:<1 (ETHER=1)
Solubility in Water:MODERATE
Appearance and Odor:GREEN LIQUID; ALCOHOL ODOR.
Percent Volatiles by Volume:86
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVELY HIGH TEMPERATURES.
Disposal
Waste Disposal Methods:RETURN UNUSED MATERIALS TO SUITABLE CONTAINS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.